Delta Planer

Manufacturer: Delta
Model: RC-51

The Delta RC-51 planer is quipped with a 7-1/2 HP motor 230/460 volt three phase. Has a working capacity of 20″ wide x 9″ thick with a minimum thickness capacity of 1/8″ and a feed rate of 25 and 46 FPM.


Maximum width 20″ (510mm)
Maximum thickness 9″ (229mm)
Minimum thickness 1/8″ (3.175mm)
Maximum depth of cut at 20″ 5/16″ (7.937mm)
Minimum length 11″ (280mm)
Feed rate 25/46 ft/min
Cutterhead diameter 4.72″ (120mm)
Cutterhead speed 5,000rpm
Cuts per minute 20,000
Table 20 x 32-3/4″ (510 x 825mm)
Motor 7-1/2hp 220v 3ph